Strapbinder’s new battery powered GripClamp™ tool tensions, locks and cuts the strap, eliminating the need for multiple tools. Both portable and bench mountable, GripClamp operates on all brands of 5/8" or 3/4" stainless or galvanized preformed J-series hose clamps, providing greater flexibility by simplifying clamp inventory and maximizing versatility.
With unlimited take-up and adjustable tension settings, GripClamp eliminates refeeding regardless of the hose diameter. It delivers 125 clamps per charge and features an 18 volt lithium-ion battery that is fully charged in only 30 minutes and 80% charged in 15 minutes.
Weighing 8.5 lbs., GripClamp features an ergonomic grip design and evenly distributed weight ...
Under conditions of high corrosion, we
recommend the stainless steel clamp. Center punch clamps are double wrapped and locked
with the conical punch of the HBC300 Tensioning Tool. To order the proper size clamp,
measure the outside diameter of the hose with the fitting inserted. Select the next larger
inside diameter clamp by Item #. 5/8" Wide Clamp - .027" Thick
K-Series clamps are double wrapped heavy-duty preformed clamps that offer two application options in one clamp. Secure by the fold-up method or as a center punch clamp. K-Series clamps also feature a punch indentation for ease of center punching and less tension loss, the patented hole in the inner band gives better internal mechanical locking after punching. 3/8" & 5/8" wide preformed clamps are available in 301 stainless steel or galvanized steel. The 3/4" wide clamps are avialable in 316 stainless steel and galvanized steel.
Open End clamps are of the same general construction as the preformed clamps with this exception, the double wrapping of the band around the hose or article is part of the application. Open End clamps are used when one end or both, of the article to be clamped, is not free or an obstruction prevents slipping a preformed clamp over the end. Open End clamps range in size from 13/16" ID to 48" ID.
Preformed clamps are double wrapped and formed to a given diameter. Used primarily where one end of the hose or article is free to allow the clamps to be slid over the hose end before the fitting is inserted. Preformed clamps range in size from 13/16" ID to 8" ID; all clamps may be pulled down to a smaller diameter but cannot be adjusted to a larger diameter.